If you don't stick to the three major items of dec

2022-07-22
  • Detail

Decoration is not about buying good materials. If you don't keep a good eye on the work during the decoration process, it's easy to have various problems, such as cutting corners, workers rushing to work, etc., so we need to strictly check. Today, Xiaobian will tell you about the three stages in the decoration process that need to be kept strictly eye on the work

decoration is not about buying good materials. If you don't keep a good eye on the work during the decoration process, it's easy to have various problems, such as cutting corners, workers rushing to work, etc., so we need to strictly check. Today, Xiaobian will tell you about the three stages in the decoration process that need to be kept strictly eye on the work

first, hydropower projects issue detailed trend charts

hydropower projects are the most common problems in the use process after decoration, so consumers must communicate more with designers or decoration companies before and after waterway and circuit decoration. Before decoration, the designer or decoration company must make a water potential trend and point distribution map, which must be planned before construction. When the decoration is finished, there may be changes in the drawing, and the other party needs to draw a more detailed circuit direction and water flow direction diagram to facilitate future maintenance

editor's note: due to the dry autumn and winter, the safety of on-site construction has also become the focus of attention at this time, including the water and electricity consumption on site during and after the water circuit connection. Construction personnel of regular companies are not allowed to live on the construction site, nor are they allowed to cook, boil water, smoke, etc. ordinary houses are less likely to have such problems, and villa decoration is more likely to have similar problems

the owner should often go to the site to see, while watching the construction process, also look at the bathroom and kitchen, how the sanitation is, whether the materials on site are stacked neatly, whether the construction waste is cleaned every day, etc. If a company's construction site management is in place and orderly, the construction quality and safety can also be more assured

second, the time of waterproof guarantee waterproof test

there are many engineering details that need to be paid attention to in the decoration in the peak season, among which the part that is most likely to be ignored because of the workers' rush is waterproof, that is, the closed water test of the toilet. The closed water test needs to be carried out after the last coat of waterproof paint is applied for 12 hours and the waterproof paint is firmly combined with the original structure of the base course

during the test, it is required to seal the door and water outlet, fill the toilet floor with water to a height of 3-5 cm, and mark it. If the water surface does not drop significantly within 24 hours, especially if there is no leakage on the roof of downstairs residents, the waterproof is considered to be qualified. Families with conditions suggest to do a 48 hour closed water test. If it fails to pass the acceptance, they must redo the waterproofing as a whole, and then conduct the acceptance again

Xiaobian reminds: there are also many precautions for the brushing of waterproof paint. First, the ground must be leveled with cement mortar before brushing, otherwise the ground is uneven, and the painted waterproof paint will also leak because of its uneven thickness; Second, the painting should be in place. The wall must be to the agreed height, and the corners of the wall and the joints between the wall and the ground must not leave gaps

third, carpentry should ensure the moisture content and strengthen the on-site protection

now the woodwork products in home decoration are mostly processed by the factory and then transported to the construction site. The components of real on-site construction are less and less, but the moisture content and installation process of woodwork products need to be paid attention to. The board products purchased by consumers need to be placed for several days after being transported to the construction site, and can be installed only after the moisture content of the board is close to the level in the room. Do not install it immediately because you are in a hurry, otherwise the change of temperature difference will easily lead to cracking, bending and deformation of the product

when the owner comes to the site to check, he should not only grasp the installation time, but also strengthen the protection of the on-site construction of wood products. The installed wood products need to be immediately painted with a layer of paint, which can not only protect the wood products, but also isolate moisture and maintain the normal moisture content of the wood

Xiaobian reminds: the temperature changes frequently in autumn and winter, and the wood products shrink due to water evaporation, and even lead to cracking from time to time. In such a case, it needs to be repaired. It is suggested to wait until next spring, when the temperature difference between cold and warm seasons changes significantly, and the problems of dryness and deformation no longer develop, and then carry out a one-time repair, which can enhance the stability of woodwork products

warm tips: for more practical decoration knowledge and follow-up photos of real scenes on the construction site, please pay attention to your palm (wechat: mall_jia)

无锡妇科医院

上海眼科医院

南京胎记医院

义乌妇科医院

Copyright © 2011 JIN SHI